Aucun produit
Les prix sont HT
LoRa Il y a 13 produits.
Sous-catégories
Indoor antenna 2dBi - LoRa frequencies
Tilting indoor antenna for LoRa frequencies. Characteristics Gain: 2dBi Size: 210 x 25mm Connector: RF N Can be tilted up to 90° Frequency band Compatible with 860-870MHz (Europe) frequency ranges
19.00 CHFProduct in Warehouse 20 - 90 daysLORIX One outdoor wall support
The extension support family is a new set of support for the LORIX One. They are made of stainless steel and are laser cut which guarantees a high quality and durable product to support your LORIX One in all weather conditions. The WHR-L01-W02 is designed for outdoor wall mounting and focuses on robustness. Links Wifx IoT's online documentation...
19.00 CHFDisponibleLORIX One outdoor mast support
The extension support family is a new set of support for the LORIX One. They are made of stainless steel and are laser cut which guarantees a high quality and durable product to support your LORIX One in all weather conditions. The WHR-L01-M01 is designed for mast mounting and allows the use of plastic or metal ties indifferently and without any...
19.00 CHFDisponibleLORIX One indoor wall support
The extension support family is a new set of support for the LORIX One. They are made of stainless steel and are laser cut which guarantees a high quality and durable product to support your LORIX One in all weather conditions. The WHR-L01-W01 is designed for indoor wall mounting and focuses on discretion. Important note:It's destined to be used for wall...
19.00 CHFDisponibleRBPOE
Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower, and in other situations. For using with RouterBOARDS that support 10-28V PoE powering,...
4.50 CHFDisponibleJiasida SP3000
Jiasida arrester SP3000, Frequency : DC-3GHz, 230V, Connector N type, Insertion loss < 0.2dB, Impedance 50 ohm
19.00 CHFDisponibleUbiquiti ETH-SP-G2: Surge Protect, PoE, 1Gbps
The Ethernet Surge Protector is a cost-effective solution for protecting sensitive, 3rd party Ethernet devices from damaging electrostatic discharges and surges. Since all Ubiquiti airMAX® devices already have robust ESD protection built in, adding the ETH-SP to the installation provides an additional layer of protection to the network. The ETH-SP is...
25.85 CHFDisponibleRBSXTR&R11e-LTE6
SXT LTE6 kit is a device for remote locations that are within cellular network coverage. Due to its advanced LTE chip design and high gain antenna, it can provide connectivity for your building even where cell phones fail.The new SXT LTE6 features a CAT6 LTE modem, which enables carrier aggregation and allows the device to use multiple bands at the same...
131.50 CHFDisponibleLORIX One - LoRaWAN® base station
Compact and robust professional grade LoRaWAN® base station IP65 – Outdoor and indoor use* Quick and easy to deploy All these characteristics make the LORIX One a perfect LoRaWAN® base station for outdoor conditions but also indoor when robust and/or discreet setup is required. * The antenna must be chosen accordingly. Links Product booklet Wifx...
549.00 CHFDisponibleOutdoor short antenna 3dBi - LoRa frequencies
IP65 outdoor short antenna for LoRa frequencies. The small size of this antenna makes it perfect for discreet installation. Characteristics Gain: 3dBi Size: 280 x 25mm Connector: RF N Frequency band Compatible with 860-870MHz (Europe) and 902-928MHz (US, Australia, etc) frequency ranges
49.00 CHFDisponible
